Digi SM-5100 - Page 79

SM – 5100 Operation Manual
79
4.16.4 Free Format Entry
At Programming Mode, select Free Format programming mode and then enter new Free
Format number (Ex. 1) programming mode. *For edit, enter existing Free Format number.
Basic Setting: (width, height, angle and label type)
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[1][2]
S12
→
FREE
FORMAT
Select Free Format setting
programming mode.
[*]
S12.0
FREE
0
1-99
Enter Free Format setting
programming mode.
Select Free Format File
Number.
[1][*]
S12.1
LABEL
0
WT MM
Enter the Free Format File
No.1.(Ex.No.1)
[4][8][*]
S12.2
LABEL
0
HT MM
Enter Label print
width.(Ex.48mm)
[3][5][*]
S12.3
LABEL
0
DG ANGLE
Enter Label print
height.(Ex.35mm)
[<<] or [>>]
S12.3
LABEL
90
DG ANGLE
[<<] or [>>] key can
change the selection of label
angle.
(0,90,180,270 degree)
[*]
S12.4
LABEL
ITEM
LABEL
Label angle is turned 90
degree.
[<<] or [>>]
S12.4
LABEL
TOTAL
LABEL
Select label type.
(Item Label; Total Label)
[*]
S12.5
PLUno
← 1
F ITEM
Enter item setting.
Refer to Base Type 1 to 4
setting.