Digi SM-5100 - Page 80

SM – 5100 Operation Manual
80
Base Type 1:
Item data in Data Base Type1 are Numeric data or Fixed data. The print position of item data
can be programmed by setting X / Y value, Print angle and Character size.
Item Label: PLU No., Price, Unit Price, Weight, Quantity, Packed date, Packed Time,
Quantity Symbol, Sell by date, Sell by time, Discount Price, Used by date, MG No., Dept. No.,
Scale No., Tare Weight, Clerk No., and Text data.
Total Label: PLU No., Packed date, Total Weight, Total quantity, Quantity symbol, Total
Price, Packed time, Letter of TOTAL, Clerk No., and Text data.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
Continued from the procedure Basic Setting: (width, height, angle and label type)
S12.5
PLUno
← 1
F ITEM
Item setting: PLU No.
[*]
S12.5
PLUno
0
X MM
Enter X value.(Ex.1mm)
[1][*]
S12.5
PLUno
0
Y MM
Enter Y value.(Ex.1mm)
[1][*]
S12.5
PLUno
0
DG ANGLE
Select print angle.(Ex.90 degree)
[>>][*]
S12.5
PLUno
0
STATUS
Enter print status.(Ex. All item print)
[7][*]
S12.5
PLUno
S1
CHAR SIZE
Select the character size.(Ex. S5)
[>>] four
times
S12.5
PLUno
S5
CHAR SIZE
[<<] or [>>] key can change the
selection of the character size.
(S1~S5; M1~M5; L1~L5)
[*]
S12.5
PLUno
← 1
F ITEM
Enter next item setting.
Note 1: STATUS TYPE: 0: NO Print 3: Weighing Item 4: Non-weighing Item 7: All Item Print
Note 2: Up to 41 different item data can be programmed in Item Label Format and is used for printing at
Manual Mode and Pre-pack Mode.
Note 3: Up to 14 different item data can be programmed in Total Label Format and is used for printing
multiple transaction labels for counter sales at Manual Mode, Sub-Total and Grand Total at Pre-
pack Mode.
Note 4: There are two ways to select the Item Data in Free Format programming by using different keys
such as:
 Enter the Item data number key.
 Press [X] key or [] key to search the Item data.