Digi SM-5100 - Page 81

SM – 5100 Operation Manual
81
Base Type 2
Item data in Base Type 2 are Alpha-numeric data. The print position of item data can be
programmed by setting the max. print area , X / Y value, width of print area from X value,
height of print area from Y value and print angle.
Item Label: Commodity Name, Shop Name, Logo, Ingredient, and Special Message.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
Continued from the procedure Basic Setting: (width, height, angle and label type)
S12.5
SHOP
N
← 13
F ITEM
Item setting: Shop name.
[*]
S12.5
SHOP
N
0
X MM
Enter X value.(Ex.10mm)
[1][0][*]
S12.5
SHOP
N
0
Y MM
Enter Y value.(Ex.1mm)
[1][*]
S12.5
SHOP
N
0
DG ANGLE
Select print angle.(Ex.180 degree)
[>>][>>][*]
S12.5
SHOP
N
0
WT MM
Enter width value.
The width of shop name printing area is
20mm.(Ex. 20mm)
[2][0][*]
S12.5
SHOP
N
0
HT MM
Enter height value.
The height of shop name printing area
is 15mm.(Ex. 15mm)
[1][5][*]
S12.5
SHOP
N
0
STATUS
Enter print status.(Ex. All item print)
[7]
S12.5
SHOP
N
7
STATUS
The status of shop name printing area is
all item printing.
[*]
S12.5
SHOP
N
← 13
F ITEM
Enter next item setting.