Digi SM-5100 - Page 87

SM – 5100 Operation Manual
87
Following is the example on how to customize standard format T8 to your needs. E.g. Add an
ingredient text and remove the PLU # from the standard Item Label Format
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
S12
→
FREE
FORMAT
At Free Format program mode
[*]
S12.0
FREE
0
1-99
Enter Free Format setting
programming mode.
Select Free Format File
Number.
[8]
S12.0
FREE
8
1-99
Enter the Free Format File
No.1.(Ex.No.8)
[X]
S12.0
FREE
NO 0
COPY
Press [X] key to enter free
format copy function.
[8] or
[<<] and
[>>]
S12.0
FREE
T8 8
COPY
Press [8] or [<<] and [>>] to
select the existing label format
you want to be copy.(Ex. T8)
[*]
S12.1
LABEL
56
WT MM
Change label width (Ex. No
change).
[*]
S12.2
LABEL
55
HT MM
Change label height (Ex. No
change).
[*]
S12.3
LABEL
0
DG ANGLE
Change print angle.( Ex. No
change)
[*]
S12.4
LABEL
ITEM
LABEL
Select Item Label.
[*]
S12.5
PLUno
← 1
F ITEM
Enter item setting.
[*][*][*][*]
S12.5
PLUno
7
STATUS
Enter PLU Number print
Status mode.
[C]or[0]
S12.5
PLUno
0
STATUS
Change the status to NO
PRINT
[*][*]
S12.5
PLUno
← 1
F ITEM
Save the setting and go to next
selection.
[8]
S12.5
COMM
← 8
F ITEM
Select Commodity Name
program mode.