Digi SM-5100 - Page 98

SM – 5100 Operation Manual
98
4.21 Scroll Message File
Maximum 100 characters can be programmed for each scroll message and up to 9-scroll message
data are available in scroll message file.
4.21.1 Program Scroll Message File
At Programming Mode, select Scrolling Message programming mode and then enter new Scroll
Message number (Ex. 1) programming mode. *For edit, enter existing Scroll Message Number.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
S1
→
PLU
FILE
Enter S mode.
[1][3][*]
S13.0
SC MG
0
NO SET
Enter Scrolling Message
programming mode.
Enter Scrolling Message number.(Ex.
1)
[1][*]
S13.1
SC MG
0
[W][E][L][C][O][M][
E][SP][T][O]……
S13.1
SC MG
STORE
21
Enter Scroll Message.
(Ex. “WELCOME TO DIGI
STORE”)
[PLU]
S13
→
SCROLL
MESSAGE
Store the Scroll message 1 data, back
to S mode.
4.21.2 Delete Scroll Message File
When the Scroll message number is linked to Scroll Sequence, it can’t be deleted.
At Scrolling Message program mode, enter existing Scroll Message Number (Ex. 1) to be deleted.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄