How to test a WR11 router step by step.
Page | 16
Navigate to:
Management - Connections > PPP Connections > PPP 1
Wait for up to 5 minutes and check for a valid IP address
You may need to refresh the page for the new address to appear (click on >PPP 1)
If a valid IP address is NOT found, please download the debug.txt and email this to Digi Technical
Support (tech.support@digi.com) or open a case at http://www.digi.com/support/eservice/ for
assistance.
Instructions on how to extract the debug.txt can be found in the following application note:
http://ftp1.digi.com/support/documentation/QN_024_Extracting%20the%20debug.txt%20file%20fro
m%20a%20Digi%20TransPort%20or%20Sarian%20router.pdf
To Next Page
Loading...
