How to test a WR11 router step by step.
Page | 8
In the file dialogue, select the “ALL” file you extracted from the ZIP earlier:
And click “Open”.
The following message will appear:
It is critical that the correct selection is made at this point.
Note 1: Since FlashWriter version 1.0.525 characters 6 and 7 are included in the W-WAN module name,
see above.
Note 2: characters 6 and 7 of the part number (SKU) on the approval label. In the example below these
are “L7”:
To Next Page
Loading...
