Digi XPress - Page 12

©2013DigiInternational,Inc. 12
XPress™EthernetBridgeGettingStartedGuide
7.Theadminpagehassectionssimilartotheloginpageshowingradiostatisticsanddevice
information,plusitaddsseveralnewsections.TheDeviceSettingsectionallowssettingthe
networkinformationandchoosinganRFfrequencychannel.Thedefaultistoallowtheradioto
chooseitsownfrequencybasedonminimizingin
terference.Ifyousetafixedchannel,makesure
theAPandallSUsusethesameone.ReferencestoDIPsrefertoswitchesinsidetheradiothatare
usedinthelegacymethodofconfigurationandmaybeignore dwhenusingthebrowsermethod.
Ifyo
uscrolldownintheadminbrowserpage,youwillcometothreemoresections:
• Agraphicalspectrumanalyzerdisplaythatmayhelpyoutoselectradiochannelsthatavoid
interference