Digi XPress - Page 13

©2013DigiInternational,Inc. 13
XPress™EthernetBridgeGettingStartedGuide
• AsectiontobeusedifanupdatetotheXPress™firmwareisrequired.RefertoUpdateFirm‐
waresectionfo
rmoredetails.
• AnAdvancedLinkssection,whichindicatesthatitshouldonlybeusedbyadvancedusers.
Despitethiswa
rning,youwillneedtoclickthe“AdvancedAdmin”buttoninordertosetthedevicetype,
IDandencryptionkey .Youshouldthenseeapagesimi lartothefollowing:
8.OntheAdvancedAdminpage,settheparametersasfollows:
• ChooseDeviceType:AccessPointorSubscriberUnit
• ForSubscriberUnits,assignuniqueIDnumbersinnumericorderfrom1to63
• ForanAccessPoint,enterthenumbersofSubscriberUnitsthatwillbecommunicatingwithit
• Clicktheboxlabeled“EnableUserSpecifiedKeys”