Contents
9XTend-PKG-U™ USB RF Modem User’s Guide
iii
1. 9XTend USB RF Modem 4
1.1. Key Features 4
1.1.1. Worldwide Acceptance 4
1.2. Specifications 5
1.3. External Interface 6
1.4. Pin Signals 7
1.5. Power Options 7
2. RF Modem Operation 8
2.1. Driver Installations 8
2.1.1. USB Background Information 8
2.2. Serial Communications 9
2.2.1. Transparent Operation 9
2.2.2. API Operation 9
2.3. Modes of Operation 10
2.3.1. Idle Mode 10
2.3.2. Transmit Mode 10
2.3.3. Receive Mode 11
2.3.4. Sleep Mode 13
2.3.5. Command Mode 15
3. RF Modem Configuration 17
3.1. Programming Examples 17
3.1.1. AT Commands 17
3.1.2. Binary Commands 18
3.2. API Operation 39
3.2.1. API Frame Specifications 39
3.2.2. API Types 40
4. RF Communication Modes 42
4.1. Addressing 43
4.1.1. Address Recognition 43
4.2. Basic Communications 44
4.2.1. Streaming Mode (Default) 44
4.2.2. Multi-Transmit Mode 45
4.2.3. Repeater Mode 46
4.2.4. Polling Mode (Basic) 49
4.3. Acknowledged Communications 50
4.3.1. Acknowledged Mode 50
4.3.2. Polling Mode (Acknowledged) 52
5. Appendix A: Agency Certifications 53
5.1. FCC (United States) Certification 53
5.1.1. Labeling Requirements 53
5.1.2. FCC Notices 53
5.1.3. Limited Modular Approval 54
5.1.4. FCC-approved Antennas 54
5.1.5. Labeling Requirements 57
5.2. C-TICK (Australia) Certification 57
5.2.1. Power Requirements 57
6. Appendix B: Additional Information 58
6.1. 5-Year Warranty 58
6.2. Ordering Information 58
6.3. Contact Digi 59
To Next Page
Loading...
