• Avoid using the equipment in extreme heat and direct sunlight. Make sure there
is adequate air movement around the equipment.
• Clean the equipment with a soft brush and dry lint-free cloth. Do not use
chemicals, abrasives or solvents.
• It is recommended that servicing is carried out only by an authorised DiGiCo
(UK) Ltd agent. Contact details for your local distributor can be found on the
DiGiCo (UK) Ltd website. DiGiCo (UK) Ltd do not accept liability for damage
caused by maintenance, repair or modification by unauthorised personnel.
Your product
This product complies with the European
Electromagnetic Compatibility directive 2004/108/EC
and the European Low Voltage directive 2006/95/EC.
Any changes or modifications to the product not approved by
DiGiCo (UK) Ltd could void the compliance of the product
and therefore the user’s authority to operate it.
A-CONTROL6 Getting Started Guide
Copyright © 2018 DiGiCo (UK) Ltd. All rights reserved.
DiGiCo (UK) Ltd, Unit 10 Silverglade Business Park, Leatherhead Road, Surrey, KT9 2QL, UK
http://www.digico.biz
To Next Page
Loading...