digico 4RE4 A-CONTROL6 - Mounting the Remote Controller; Mounting Options Overview; Plinth Mount Installation

A-Control6 Getting Started Guide
7
AP11451 Issue 1
2. Mounting the Remote Controller
The A-CONTROL6 can be used free standing or mounted on a standard microphone
with the DiGiCo Mic Stand Adaptor.
2.1 Plinth mount
Use the holes indicated below for 6B screws when mounting in a plinth, podium or
furniture. Ensure adequate air flow around the unit.
Non-slip feet fitted
for shelf use
Top of mic stand
with DiGiCo adaptor