IMPORTANT - Read before starting
Safety instructions
Before starting, read the Important Safety Instructions printed on the sheet supplied
with the equipment. For your own safety and that of the operator, technical crew and
performers, follow all instructions and heed all warnings printed on the sheet and on the
equipment panels.
Refer to this User Guide for information on applicable power supply whenever
this symbol is printed on the equipment panels.
System operating firmware
The function of the A-Control Remote Controller is determined by the firmware (operating
software) that the mixing system runs. Firmware is updated regularly as new features
are added and improvements made.
Software licence agreement
By using this DiGiCo (UK) Ltd product and the software within it you agree to be bound
by the terms of the relevant End User Licence Agreement (EULA), a copy of which can
be found at http://www.digico.biz/docs/about/legal.shtml . You agree to be bound by the
terms of the EULA by installing, copying, or using the software.
Further information
Please refer to the DiGiCo website for further information, knowledgebase and technical
support. For more information on 4REA4 setup and mixing functions please refer to the
4REA4 Reference Guide available for download at www.digico.biz.
General precautions
• Use only the power supply provided with this device (Sunpower EA1024H1-120).
• Protect the equipment from damage through liquid or dust contamination. Cover
the equipment when it is not being used for a long period.
• If the equipment has been stored in sub-zero temperatures allow time for it to
reach normal operating temperature before use at the venue. Recommended
operating temperature is 0 to 35 degrees Celsius.
To Next Page
Loading...