Packed items
Check you have received the following:
• A-CONTROL6 Remote Controller
• Getting Started Guide AP11451
• Safety Sheet
• 12V Power Supply
1. Introduction
The A-CONTROL6 is part of the DiGiCo A-Control Series of remote controllers. It
interfaces with the DiGiCo mixing system via standard TCP/IP Network connections and
can therefore be networked with other controllers, computers and third-party devices
using a standard Ethernet infrastructure. It can be powered by an external 12V PSU or
over Ethernet (PoE).
The A-CONTROL6 controls and functions are programmed using the 4REA4 Controller
software for PC/Mac, and can suit a number of applications including:
- Personal Monitoring – The A-CONTROL6 can be configured to control the
Send levels, Pans and assignments of multiple channels to a specific mix on
the 4REA4, for example for wireless IEM use, giving musicians the freedom to
control their own monitor sound.
- Installation – The installer or system integrator can configure the A-
CONTROL6 to provide the degree of control needed by the day to day
operator, for example the levels of microphones and music sources in a room.
To Next Page
Loading...