Digicom 2G GSM Gateway Lift User Manual

ENG3.1
2G GSM Gateway Lift Remote Control via SMS
3. REMOTE CONTROL VIA SMS
The device configuration is performed via SMS; so you can remotely manage the device. It will be possible at any time to remote
query the device to know the battery status and the quality of GSM signal.
Only authorized users can remote manage 2G GSM Gateway Lift; for every message received it will check the calling number
identification.
You can remote manage and set the following items:
• Phonebookwith4 users authorized to configure the device.
• Phonebookwith 4 users authorized to receive the informative messages from 2G GSM Gateway Lift.
• Battery Low message when the back-up battery has about 90 - 60 minutes autonomy.
• Reception of “shutdown in progress” message when the back-up battery has about 30 - 5 minutes autonomy.
• Remote reboot to force a new registration to the GSM network.
• Status request to check the back-up battery status and the GSM signal quality.
3.1. LIST OF AUTHORIZED USERS
The first SMS of programming will be the list of users authorized to remote configure the device and the list of users that can
receive messages from the device.
3.1.1. LIST OF AUTHORIZED USERS: CONFIGURATION
*1 # ID # conf1 , conf2 , conf3 , conf4 # dest1 , dest2 , dest3 , dest4
ITEM DESCRIPTION
*1 Key of message to configure the list of authorized users
# Separation symbol
ID Device ID. Max: 8 alphanumeric characters Default: DIGICOM
# Separation symbol
conf1 Phonenumberenabledtocongureandmanage2GGSMGatewayLift
, Separation symbol
conf2 Phonenumberenabledtocongureandmanage2GGSMGatewayLift
, Separation symbol
conf3 Phonenumberenabledtocongureandmanage2GGSMGatewayLift
, Separation symbol
conf4 Phonenumberenabledtocongureandmanage2GGSMGatewayLift
# Separation symbol
dest1 Phonenumberenabledtoreceivetheinformativemessagefrom2GGSMGatewayLift
, Separation symbol
dest2 Phonenumberenabledtoreceivetheinformativemessagefrom2GGSMGatewayLift
, Separation symbol
dest3 Phonenumberenabledtoreceivetheinformativemessagefrom2GGSMGatewayLift
, Separation symbol
dest4 Phonenumberenabledtoreceivetheinformativemessagefrom2GGSMGatewayLift
Note:
 • Youcancongurealowernumberofusers.
 • Itispossiblenottoinsertthelistofusersauthorizedtoconguratethedevice;inthiscaseyoumust
respectthesequenceof#(hash)separationsymbols.
 • Thephonenumberscanbeinsertedwithorwithoutinternationalprex.Youcanusenumbersfrom0to
9andthesymbol+asrstsymbolincaseyouinsertaninternationalprex.Eachphonenumbercanbe
composedof17digitsmaximumincludedthesymbol+.
 • Ifnolistofauthorizedusersisset(conx),thenanyonecanremotemanagethedevice.
Examples:
*1#DIGICOM#+393351234567,+393409876543#+393351234567,+393409876543
*1#DIGICOM##+393351234567,+393409876543

Digicom 2G GSM Gateway Lift Specifications

General

Brand	Digicom
Model	2G GSM Gateway Lift
Category	Gateway
Language	English