Signal Name/Description
CN1 INPUTS
1 +Vext1 (enables turn through voltage)
2 HAB1 (enables turn through dry contact – from right to left)
3 GND
4 Vext2 (enables turn through voltage)
5 HAB2 (enables turn through dry contact – from left to right)
6 GND
7 +12Vdc (available to auxiliary – maximum 500 mA)
8 CLOCK1 (input for reader from left to right)
9 DATA1 (input for reader from left to right)
10 CLOCK2 (input for reader from right to left)
11 DATA2 (input for reader from right to left)
12 GND
13 PROG1 (programs direction)
14 PROG2 (programs direction)
15 PIC1 (controls frontal pictogram 1)
16 PIC2 (controls frontal pictogram 2)
CN2 OUTPUTS
1 NO or NC Contact (HAB1 return)
2 Contact C (HAB1 return)
3 NO or NC Contact (HAB2 return)
4 Contact C (HAB2 return)
5 Output for indicative X (open collector NPN – maximum 500 mA) orange wire
6 Output for arrow > (open collector NPN – maximum 500 mA) blue wire
7 Output for arrow < (open collector NPN – maximum 500 mA) green wire
8 +12Vdc (indicative arrows’ power) red wire
9 GND (indicative arrows’ power) black wire
10 + solenoid of badge collector box
11 - solenoid of badge collector box
12 Sound signal (open collector – NPN)
CN3 SERIAL RS-485
1 DATE -
2 DATE +
3 GND
CN4 SIDE PICTOGRAM 2
1 +12Vdc (indicative arrows’ power)
2 Output for indicative X (open collector NPN – maximum 500 mA)
3 Output for arrow > (open collector NPN – maximum 500 mA)
4 GND (indicative arrows’ power)
CN5 SIDE PICTOGRAM 1
1 +12Vdc (indicative arrows’ power)
2 Output for indicative red arrow (open collector NPN – maximum 500 mA)
3 Output for green arrow (open collector NPN – maximum 500 mA)
4 GND (indicative arrows’ supply)
CN6 INPUT/OUTPUTS
1 input or output 1 – configure at S4 (IN or OUT)
2 input or output 2 - configure at S5 (IN or OUT)
3 GND
4 +12Vdc
CN7 SERIAL RS-232
2 TX
3 RX
5 GND
CN8 POWER – POWER INPUT
1 +12Vdc power input
2 GND power input
CN9 BOX SENSOR
1 LED anode
2 box signal
3 GND
4 GND
CN10 ELECTROMAGNETS
1 + electromagnet 1
2 - electromagnet 1
3 + electromagnet 2
4 - electromagnet 2
CN11 OPTICAL SENSORS
1 sensor 1 signal
2 LED 1 anode
3 sensor 2 signal
4 GND
5 LED2 anode
To Next Page
Loading...