Expanded Systems Guide26
4 Verify that each of the Digidesign audio cards
appears in the DigiTest window. Also, make sure
the cards are installed in the appropriate slots
for you expansion chassis.
5 To verify and automatically test each card,
click Run. When the test is completed, check in
the Status column for any error messages.
Click the Info button for details of any test fail-
ures. For a list of DigiTest error codes, see the
TDM Installation Guide.
6 Choose File > Quit to close DigiTest.
For information on slot order configuration,
refer to the chapter for your expansion chas-
sis in this Expanded Systems Guides.
After using DigiTest, you must restart your
computer before using Pro Tools.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...