Digikeijs DR5088RC DIGIDETECT

DR5088RC DIGIDETECT 30.05.2019
P 31
www.digikeijs.com
5.3 Randomly programming address via USB
You can assign addresses to the DR5088RC completely randomly with the Conguraon soware.
In doing so, you connect the DR5088RC to your PC.
Make sure that you connect the DR508888RC without connecng the TRACK INPUT!
Once the DR5088RC is connected to the PC, in the conguraon soware you can select the desired output group.
(1 - 8, 9 - 16 or TRACK OUTPUT for the Global Detector.)
This opens the corresponding control panel.
In this conguraon screen you can assign addresses to any output at any me.
1 21 17 34
1555
18 12 5 9 55 59 64 66 51 70 88 92