DR5088RC DIGIDETECT 30.05.2019
P 37
www.digikeijs.com
7.1 iTrain®
1. Open the feedback screen by clicking >> Change >> Feedback (CRTL + F7).
2. Create a new feedback by clicking on "New".
3. Select 'Occupied' as the detector type.
4. Select the LocoNet® interface.
5. For Address, enter the address corresponding to the desired detector input.
6. Press the Apply buon. The feedback now appears on the le screen.
2
3
4
3
To Next Page
Loading...
General