DR5088RC DIGIDETECT 30.05.2019
P 38
www.digikeijs.com
7.2 Traincontroller® 9
Traincontroller® can evaluate the DR5088RC. For this, the DR50088RC must be congured in such a way that it funcons as a "Blücher®" feedback module and the evaluaon
of the Railcom direcon "in locomove address" takes place.
Important! In the mode Detecon of derailing direcon "in locomove address" only DCC locomove addresses up
to 4096 can be used.
These sengs are necessary in the digital system.
It is important that train idencaon is acve.
LocoNet Bluecher GMB 16X must be selected in
the train idencaon.
To Next Page
Loading...
General