PVR: key not active.
FAV: to show favorite list (if create).
INFO: to display the info bar at the bottom of the
screen. Press again to display the EPG and
another time to show channel info.
EPG (Electronic Program Guide): to open the
program guide.
Batteries
Not included. We recommend to use rechargeable
batteries to protect the environment.
Installing the Batteries
Remove the battery cover from rear of the remote
control and place 2xAAA size batteries inside the
compartment: refer to the drawings inside for the
correct positioning of the batteries.
• CAUTION: use AAA batteries.
• CAUTION: careless use of batteries can cause
explosions, corrosion and production of acidic liquid. Use
them carefully to avoid acid leaks. If liquid is produced,
remove it from inside the remote control and insert new
batteries. When inserting batteries, take care to align the +
and - polarity. Remove them if you are not going to use
the product for a long period of time. Do not leave empty
batteries inserted. Do not throw batteries into a fire and do
not short-circuit, open or subject them to excessive heat. If
batteries are not rechargeable, do not attempt to recharge
them. Replace batteries with the same or equivalent type
recommended by the factory. Do not use one new and
one old battery, or batteries of different types, replace both
with new ones of the same type. Do not dispose of
batteries in the environment.
Using the remote control
Point the remote control towards the IR sensor
connected to the receiver. Remove any object place in
the path from the remote control to the sensor.
SOME KEYS AND FUNCTIONS
Quick reconfiguration
Pressing this button on the remote control starts
To Next Page
Loading...
