Local Time Setting menu
- Time. Not adjustable.
- Time Zone Setting. Adjustable.
System menu
- System Information
- Factory Setting. To reset the decoder. You need
to enter the PIN. Use this function with caution,
all stored data will be lost! It will be necessary
to repeat the channel search.
- Set Timer. A timer can be set to display when a
program starts. The receiver will switch to the set
channel just before the event.
- OSD Setting. To set the display of information on
the screen.
- USW Update. It is necessary to use USB
devices. We recommend to use USB devices that
have not high dimensions, as the receiver is
powered by the TV.
- OTA Update. Via antenna if available.
- Other: Automatic Standby. After 3 hours of total
inactivity (no control) by law the receiver
automatically switches off. You can switch it off or
set the desired switch-off time from a minimum of 3
minutes (press OK and then EXIT to save).
Multimedia menu
It is necessary to use USB devices. We
recommend to use USB devices that have not high
dimensions, as the receiver is powered by the TV.
Note: the standard USB port in the TV can provide
a power supply of about 500 mA. Proper
functioning of hard disks is not guaranteed, it is
recommended to use USB devices.
- Music / Pictures / Movies, music, photos and
videos can be played.
- USB Information: related to connected memory.
- USB formatting: to format the connected
memory. WARNING: all stored data will be lost.
To Next Page
Loading...
