6
Other Modes of Operation
80 Shots mode is ready
only when the LCD Panel
displays the
“
” icon
A . 80 Shots Mode
This mode of operation allows you to take 80 shots of lower-resolution images
in QCIF (176 x 144) format. To set your camera into 80 Shots mode
1 Repeatedly press the Function Mode button until the “ ” icon is displayed
on the LCD Display Panel.
2 Press the Shutter button and the “ ” icon becomes “ ” which would
indicate that the 80 Shot mode is ready.
NOTE: Switching from 80 pictures mode to 20 pictures modes will not erase
any images in the camera. If you attempt to continue shooting at the end of
80th shot, a repetitive beep will emit when you press the Shutter button.
Repeatedly press this
Function Mode button until
the “
” icon is displayed
When the “
” icon appears
on the LCD Panel, press
Shutter to display the “
”
icon
To Next Page
Loading...
Need help?
General
