Error Message Indication
Below is the list of some error messages you might e
ncounter when using the unit.
Suggested solutions are also included.
The internal memory is full. Please remove
some images and/or audio files, so you can
copy new files to it again.
The memory card may not be inserted
properly. Please check the card and make
sure it is inserted properly.
The unit cannot delete files you selected.
Please contact your nearest service center for
assistance.
Selecting an Image
1
. After you turn on the unit, press under (Thumbnail view) and press the
navigation controls / / / to move to an image you want to see.
2. To see the selected image in full screen, press under (Single view).
Playing a Slideshow
1. After you turn on the unit, press
under (Slideshow).
2. The slideshow automatically starts. To stop the slideshow, press under
(Single view) or (Thumbnail view). You can also press under Mode to
switch to another mode.
Options in the Photo Mode
Pan
When an image is enlarged, you can use the navigation controls / /
/ to move to a particular area you want to see.
Edit Slideshow
Selects the images you want to see in the slideshow. Press under Select to select
or unselect an image. A ticked thumbnail means the image is selected. Similarly, an
unticked thumbnail means the image is not selected.
Copy to Memory
Copies selected images to the internal memory.
Delete
Removes the currently selected image from the internal memory.
Display Layout
Selects the number of thumbnails to display.
Rotate
Rotates the currently selected image (in the memory card) to another angle. The
rotation angle will be automatically reset to zero after you move to another image.
Display Clock
Selects whether to show the clock in the Photo mode.
Slideshow Setup
Setup for the background music, interval between images, transition effect, and the
sequence to show images.
To Next Page
Loading...
