Digitax F2 PLUS

To Next Page

To Previous Page

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third

party is strictly prohibited.

Main Page

Table of Contents3
Introduction4
About this Manual4
Electrical Connections Table5
Specifications6
Connectors - Pins out7
How to Fix the Taximeter8
Fixing Plate8
Universal Meccanical Tranducer9
How to Assemble9
Test Connector10
E-Seal"- Electronic Sealing: 1St Section11
E-Seal"- Electronic Sealing: 2Nd Section12
How to Seal the Taximeter13
Regular Way of Sealing the Taximeter13
Taximeter Display14
Display Composition and Inscription14
Time Syncro15
For Hire-Stopped-Hired16
The Operative Mode16
K" Constant17
(Car Odometer Transmission Ratio)17
Time and Date Setting18
How to Set the Taximeter's Time and Date18
Diagnostic Self-Test (Check Sum)19
Statistical Memory20
How to Read the Statistical Memory Content20
Statistical Memory21
How to Print the Statistical Memory Content21
Statistical Memory22
How to Erase the Statistical Memory Content22
The Tariff23
General Description23
The Tariff24
How to Program the Tariff24
Tariff Show25
Tariff Show26
The" Progdate27
The "Sel-Function28
Programming Keys29
Programming Parameters (Questions Could be Locked Depending on some Country Specific Settings)30

Digitax F2 PLUS - Page 2

Table of Contents

Related product manuals