Need help?Do you have a question about the Digitax M1 mdt and is the answer not in the manual?
General| Brand | Digitax |
|---|---|
| Model | M1 mdt |
| Category | Automobile Accessories |
| Language | English |
Explains the standard procedure for sealing the taximeter for regulatory compliance.
Provides step-by-step instructions for assembling the mechanical speed sensor.
Illustrates the taximeter's electrical connections and pin assignments for various components.
Explains how to pre-select a tariff before starting a trip to prevent fraudulent use.
Guides on programming and finding the K-Constant (car transmission ratio) value.
Details the E-Seal memory sections for tracking programming changes and event counters.
Provides a detailed guide on manually programming tariffs using blocks and parameters.
Explains ProgDate for time-event based programming and its action codes.
Details parameters for tariff structure, including distance, waiting time, and cost.
Covers parameters for configuring extra charges, including cost, percentage, and limits.
Details parameters for setting a fixed cost fare using the keypad or front keys.
Covers parameters for configuring night-time and holiday-time rates.
Explains parameters for Prog-Date 3 to 8, covering block selection and cost adjustments.
Details parameters for Counters N.1 to N.4, used for tariff-block changes based on events.
Covers parameters for controlling statistical memory blocks, including visualization and resetting.
Details parameters for checking printer status, GPS coordinates, and transmitting device statuses.
Covers authorization thresholds, timeouts, keyboard lock timing, and speed settings.
Details the pinout and cable color information for all device connectors.
Explains how to enable and configure Active Sync for PC connection via USB.
Guides on using InstallReg and SaveReg utilities for managing system registry.
Explains how to export and load AITP configuration files for device setup.
Describes how to read, reset, and manage odometer signal (distance pulses) via AITP.
Explains the shutdown sequence, signaling applications, and default time settings.
Explains creating a system backup image and restoring the device from it.
To Next Page
