The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
Block-offset in Prog-Date 6 : NOT USED for F2 Plus
Percentage or cost in Prog-Date 6: NOT USED for F2 Plus
0 - 65535
percentage/co
st
Increase unit-cost in Prog-Date 6 : NOT USED for F2 Plus
Increase initial-cost in Prog-Date 6 : NOT USED for F2 Plus
Decrease unit-distance in Prog-Date 6 : NOT USED for F2 Plus
Decrease unit-waiting-time in Prog-Date 6 : NOT USED for F2 Plus
Insert as fixed cost in Prog-Date 6 : NOT USED for F2 Plus
Insert as percentage in Prog-Date 6 : NOT USED for F2 Plus
Insert as fixed cost in Prog-Date 6 with K1 : NOT USED for F2 Plus
Insert as percentage in Prog-Date 6 with K1 : NOT USED for F2 Plus
Block-number in Prog-Date 7 : NOT USED for F2 Plus (max).
Block-offset in Prog-Date 7 : NOT USED for F2 Plus
Percentage or cost in Prog-Date 7: NOT USED for F2 Plus
0 - 65535
percentage/co
st
Increase unit-cost in Prog-Date 7 : NOT USED for F2 Plus
Increase initial-cost in Prog-Date 7 : NOT USED for F2 Plus
Decrease unit-distance in Prog-Date 7 : NOT USED for F2 Plus
Decrease unit-waiting-time in Prog-Date 7 : NOT USED for F2 Plus
Insert as fixed cost in Prog-Date 7 : NOT USED for F2 Plus
Insert as percentage in Prog-Date 7 : NOT USED for F2 Plus
Insert as fixed cost in Prog-Date 7 : NOT USED for F2 Plus
Insert as percentage in Prog-Date 7 with K1 : NOT USED for F2 Plus
Block-number in Prog-Date 8 : NOT USED for F2 Plus
Block-offset in Prog-Date 8: : NOT USED for F2 Plus
Percentage or cost in Prog-Date 8: NOT USED for F2 Plus
0 - 65535
percentage/co
st
Increase unit-cost in Prog-Date 8 : NOT USED for F2 Plus
Increase initial-cost in Prog-Date 8 : NOT USED for F2 Plus
Decrease unit-distance in Prog-Date 8 : NOT USED for F2 Plus
Decrease unit-waiting-time in Prog-Date 8 : NOT USED for F2 Plus
Insert as fixed cost in Prog-Date 8 : NOT USED for F2 Plus
Insert as percentage in Prog-Date 8 : NOT USED for F2 Plus
Insert as fixed cost in Prog-Date 8 with K1 : NOT USED for F2 Plus
Insert as percentage in Prog-Date 8 with K1 : NOT USED for F2 Plus
Prog-Date priority ManagemeNt
Priority of Prog-Date 1 (night-time) - This is the number that corresponds with the priority that Prog-Date n. 1 has with respect to the other Prog-Dates. The allowed
number goes from: 8 (min. priority) to: 1 (max. priority). If two or more Prog-Dates have the same number then those Prog-Dates have the same priority.
Priority of Prog-Date 2 (holiday-time) - This is the number that corresponds with the priority that Prog-Date n. 2 has with respect to the other Prog-Dates. The allowed
number goes from: 8 (min. priority) to: 1 (max. priority). If two or more Prog-Dates have the same number then those Prog-Dates have the same priority.