DIGITECH Audio XC-0387 - Audio Settings and Playback Modes; Volume Adjustment; A-B Repeat Mode

Volume Adjustment:
 In file playback or stopped state, press “V” volume
button first.
 Then press “+” to increase the volume, or “-” to
decrease the volume. The volume bar will
increase and decrease accordingly.
 Press “V” Volume button again to exit.
A-B Repeat Mode:
・ In playback state, press “M” Menu button to set up
beginning point A.
・ The LCD will display A-B, B will flash, press “M”
again to set up ending point B.
・ LCD will display AB to repeat the contents
between A-B.
・ To cancel the mode selection, press “M” Menu and
cancel A-B repeat.
・ Press “ ” to cancel A-B repeat and playback will
stop.
・ Press “ ” to cancel A-B repeat and playback
pause.