Bluetooth Technology Function
Main Functions
Turning ON/OFF:
1. Power ON your headphones:
Press and hold the Multifunction Button (MFB) for about 4 seconds until the Bluetooth LED
indicator light starts flashing Green/Red rapidly with an ascending sound.
2 .Power OFF your headphones: Press and hold the MFB for about 5 - 6 seconds until the
Bluetooth LED indicator light turns solid Red with a descending sound.
Getting Started with your Headphones:
To use your Stereo Bluetooth Headphone, please follow the steps below:
a) Ensure your Bluetooth Headphone is fully charged (before first use).
b) Pair your charged Bluetooth Headphone with a Bluetooth-enabled mobile phone prior to
first use.
Pairing your Headphone:
The headphone works with Bluetooth-enabled mobile phones. Prior to using and pairing
your headphone for the first time, please check to make sure that your mobile phone is
Bluetooth-enabled.
The pairing instructions for typical Bluetooth-enabled mobile phones are explained in
“Pairing Your Headphone.” The headphone pairing procedure may vary depending on the
settings of your mobile phone. Please contact the manufacturer of your mobile phone or its
agent for further information.
1. Press and hold the MFB for about 4 seconds until the Bluetooth LED indicator flashes
alternately between Green and Red. Now the AA-2130 will enter into pairing mode.
2. Enable searching of nearby Bluetooth devices using the Bluetooth menu on your device.
3. Once the AA-2130 is found, you can now connect and pair. If your device prompts you for
a password, please use “0000” - For more details, please refer to your device’s owner
manual.
4. When pairing is successful, the Bluetooth LED indicator will flash green every 4 seconds. If
pairing is unsuccessful, please turn off the AA-2130 headphones and repeat the pairing
steps.
To Next Page
Loading...
