What to do if my DigiTech Headphone has no audio?
If you're not getting any sound from your DigiTech Headphone, first, make sure the volume on your smartphone is turned up. Then, confirm that the earphones are correctly paired and turned on. If the problem persists, try turning the earphones off and on again, and also toggle the Bluetooth on your smartphone or tablet off and then back on. If you are prompted for a password, enter "0000".
How to fix DigiTech Headphone that won’t charge or power on?
If your DigiTech Headphone won’t charge or power on, connect it to a suitable USB charging source, such as a USB mains power adapter or USB charging port, ensuring it's correctly turned on. Allow up to 2 hours for a full charge, and check that the LED status indicator turns off, signaling a complete charge.
Why my DigiTech AA-2165 Headphone has no power / LED indicator?
If your DigiTech Headphone has no power and the LED indicator isn't lighting up, ensure the USB charging cable is properly connected to a working USB charging port or adapter. Also, verify that the USB power source itself is functioning correctly.
Steps to connect earphones to a smartphone via Bluetooth.
How to use earphones for calls and voice assistants.
Instructions for recharging the TWS earphones within the case.
Steps for charging the earphone case using a USB cable.
To Next Page
General
