Operation:
Bluetooth Paring:
1. Make sure the earphones are fully charged
before use, pull both earphones out of the
charging case.
Note: Press and hold the power button for
up to 5 seconds to turn the earphones off.
2. The LED indicator should be flashing red and
blue. Open the settings of your smart phone
and ensure Bluetooth® is turned on.
3. Once your Bluetooth® is enabled; Scan for
devices and the Bluetooth® name AA-2165
should appear.
Bluetooth® Name: AA-2165
4. Press the AA-2165 on the Bluetooth® device
list and your smartphone should show that it is
connected.
To Next Page
Loading...
