FACTORY RESET
Factory Reset gives you two different options for restoring the memory of the GSP-2101 Artist
to its original factory condition. The first (RELOAD PRG/ALG) is a hard reset that permanent-
ly erases all user Programs and Algorithms in the unit. If you want to erase everything you’ve
programmed, this is the reset to use. The second option (RESET Utility/MIDI) is a softer reset
that simply restarts the GSP-2101 Artist. This reset does not affect the status of any user
Programs or Algorithms, and is similar to turning the GSP-2101 Artist’s power switch off and
back on. To restart the unit, this is the reset to use.
WARNING: Performing the following procedure will destroy all user-programmed
data(including Programs and Algorithms), and all such data will be lost forever!
To perform a Program Algorithm reset of the GSP-2101 Artist, do the following:
• After entering Utility mode, press [NEXT] once. The display reads:
• Press Function key [2]. The display reads:
• Press Function key [1] once. The display reads:
• This is your last chance to change your mind. To reset, press Function key [3] once.
The display briefly reads:
after which you exit. To abort the operation, press Function key [1] or [UTILITY],
and you will be returned to the current Program.
To reset Utility and MIDI menus of the GSP-2101 Artist, do the following:
Resetting
Please wait ... /
Are You Sure?
No Yes
¡Reload Prg/Alg
™Reset Utility/MIDI
¡Global EQ
™Factory Reset
≤
84
Section 7 - Other Utilities
GSP-2101 Artist Owner’s Manual
Other Utilities
To Next Page
Loading...
