DigiTech B-COCKPiT BC351 - Install the Button Unit; Connect the cables

B-COCKPiT BC351 使用说明书
8
Shenzhen Digitech Co., Ltd. www.riding-evolved.com
 Install the Button Unit
1. Use M3 Hex Socket Screw 3 to secure the mounting bracket to the left side of the handle bar.
Tightening torque: 0.2N.m. Do Not Overtighten or it may cause damage to the button.
 Connect the cables
1. Securely connect the cables of B-COCKPiT with E-bike controller by aligning the 2 arrow
marks.
Arrow mark
Arrow mark