Section 3 - Programming the Control One
All programming and setup for the Control One is performed from the front panel of the 2112 SGS, GSP-2101,
Valve FX or Legend II. Most of the setup menus that deal with the Control One can be found in the Foot
Controller section of the Utility setup menu.
For complete infomation of how the Control One interacts with the 2112 SGS, GSP-2101, Valve FX or Legend II
it will be necessary to refer to the original Owner's Manual shipped with each product. Although the features and
functions are common in these three products, their procedures for setup vary slightly from product to product.
The first time the Contol One is connected to the GSP-2101, Valve FX or Legend II it will be necessary to cali-
brate the CC pedal to function correctly. This function can be found by pressing the <UTILITY> button once on
the GSP-2101, Valve FX or Legend II. Please refer to the GSP-2101, Valve FX or Legend II's Owner's manual for
further instructions.
The 2112 SGS will automatically calibrate the Control One when connection is made.
6
Section 3 - Programming the Control One
Control One Owner’s Manual
To Next Page
Loading...
Need help?
General
