Need help?Do you have a question about the DigiTech CONTROL 2 and is the answer not in the manual?
General| Brand | DigiTech |
|---|---|
| Model | CONTROL 2 |
| Category | Accessories |
| Language | English |
Verifies the GSP1101 software version compatibility with the Control 2.
Controls navigation between preset banks.
Shows current bank, preset, and status information.
Indicates selection of factory presets or banks.
Illuminates when the Wah effect is active.
Built-in pedal for real-time parameter control.
Footswitch to enable/disable the GSP's tuner function.
Footswitch to set the delay time for presets.
Selects presets 1 through 5 in the active bank.
Controls effects on/off or selects presets 6-10.
Connects the controller cable to the GSP unit.
Connects an optional external expression pedal.
Explains the two operating modes: 5 Patch Mode and 10 Patch Mode.
Instructions on how to change the operating mode.
Details how to navigate and select preset banks.
Steps to choose specific presets within a bank.
How to bypass an active preset or individual effects.
Control effects on/off status using specific footswitches.
Feature for switching between two presets using one footswitch.
Maintains relative volume levels between presets using the expression pedal.
Configure Expression Pedal/CONTROL Footswitch to send MIDI CC messages.
Procedure to calibrate the expression pedal for smooth control.
Accesses the GSP's tuner and provides feedback on the Control 2 display.
Set up the CONTROL footswitch to control chosen parameters.
Assign parameters to the built-in or external expression pedals.
To Next Page
