Connections
The Crossroads
™
pedal features a single INPUT and a pair of outputs,
OUT 1 (AMP) and OUT 2 (MIXER). The two outputs give you the
option of running into one (mono) or two (stereo) guitar amplifier(s),
running directly to a mixing console (one or two channels), recording
device (L/R), or any combination of the two outputs. The
OUT 2
(MIXER)
output has been specially designed to faithfully reproduce
Eric’s studio guitar amplifier tones without having to use an amp.
(Please refer to the
Connections Diagrams on the following pages.)
Crossroads Outputs Diagram
To Next Page
Loading...
