Need help?Do you have a question about the DigiTech DSP-128 and is the answer not in the manual?
General| Sampling Rate | 44.1 kHz |
|---|---|
| Bit Depth | 16-bit |
| Effects | Reverb, Delay, Chorus, Flanger, Phaser, Pitch Shift, Detune, Multi-Tap Delay, Gated Reverb, Speaker Simulator, Parametric EQ, Noise Gate, Compressor, Limiter |
| Type | Digital Effects Processor |
| Input Connections | 1/4" Phone |
| Output Connections | 1/4" Phone |
| Presets | 128 |
| Inputs | 1 x 1/4" Instrument |
Instructions for mounting the DSP 128 in a rack or as a free-standing unit.
Guidance on routing the power cord away from audio lines.
Setting input/output switches for line or instrument level signals.
Details on connecting audio cables to the unit, including mono signal sources.
How to adjust the input level using the LED bargraph for optimal performance.
Procedure for adjusting the output level control to achieve desired output.
Using the OUTPUT MIX control to set the dry to wet signal ratio.
Connecting a MIDI controller for program changes and accessing MIDI features.
How to use the factory preset programs by pressing up/down buttons.
Details the controls and indicators on the DSP 128's front panel for operation.
Explains the rear panel connections and ports for audio and MIDI.
Explains how program numbers select memory locations and are controlled via MIDI.
Defines the signal processing effect or combination of effects used by the DSP 128.
Details how users customize sound by adjusting algorithm-specific parameters.
Lists abbreviations and descriptions for various effect algorithm parameters.
Visual guide to navigating the DSP 128's programming menus and functions.
Step-by-step guide demonstrating how to program a specific effect into the DSP 128.
Procedure for transferring the contents of one program location to another.
Method to delete a program and replace it with the factory preset for that location.
Erases all programs and midi parameters, restoring the unit to factory default values.
A special mode to display the unit's capabilities, not for performance.
Initiates a self-test sequence to check the functionality of the DSP 128 unit.
Displays the current software revision number of the DSP 128.
Overview of MIDI communication specifications for musical instruments.
Explains how the DSP 128 uses MIDI for remote control of effects.
Details MIDI channels for data transmission and reception on the DSP 128.
Procedure for changing the MIDI channel number, OMNI, or OFF modes.
How MIDI Program Change Numbers correspond to and change DSP 128 presets.
How MIDI Continuous Controllers can be assigned to control effect algorithm parameters.
Step-by-step guide for assigning MIDI controllers to specific effect parameters.
Saving preset values, MIDI channel, and controller assignments via MIDI system exclusive dump.
Technical specifications including inputs, outputs, resolution, and frequency response.
To Next Page