7
3~5 seconds, till you see the indicator from blue to green, or simply power o
the Cassette to MP3 Converter, then power on again, it will load at default----
manually mode.
5.3 Use AUX port:
You can also record music from other sources with an 3.5mm audio cable (such
as: radio, MD players, anything with audio line out)
5.4 Known problems in Auto mode:
Due to the auto function is based detecting the level of music: when the level is
lower than the setting in firmware, the Cassette to MP3 Converter will take it as
space between two songs, so there will be chance to meet following situations:
1. If there is a long pause in a song, the Cassette to MP3 Converter may take it as
two songs, and save 2 files for it.
2. If the space between two songs is too short which the Cassette to MP3
Converter can not detect, it will take them as one song, and save the two songs
in one file. When you meet this situation, you can use the Audacity software to
editing them.(find the link following).
NOTE: We do not suggest to power o (unplug the power supply) or unplug
the USB flash during recording, even we make a design that the device will
automatically save the MP3 file for previously recording when power
o or USB flash unplugged during recording.
NOTE: You may feel the music volume level of playback is smaller than
cassette playing, don’t worry it, as the actual level of recording MP3 is
normal, we just set a little down the playback level for save energy. You
will find it is good when you playback the MP3 of your computer or mobile
multimedia device ( like iPod, mobile phone)
You have to re-power (unplug AA battery or USB power supply, then re-plug) the
device if you unplug the USB flash during recording, otherwise both recording
and replay button will be un-working.
6. Playback
The device with playback function so you can easily checking the recorded file.
At standby mode, press playback button , device will start to play the recording
music, the indicator will be slow flashing. Press playback button again, will stop
playback and back to standby mode. During playback, use up/down button to
choose play previous or next file. Use +/- button to set volume up and down.
You can also copy other MP3 file to USB flash and plug to our device to replay it,
but only files in “TAPEMP3” folder can be played.