8
TROUBLESHOOTING
Problem Solution
Press recording button,
nothing happens,
indicator keep on.
USB flash connection
problem
Just re-plug and try again
USB cable wrong
connection, see chart 2,
if plug USB male 1 to DC
adapter, USB male 2 to
device, this is wrong but
you will see indicator keep
on seems working, but
device can not detect USB
flash in this way, so can not
recording
Connect USB in right way
USB flash un-working Change one or fix your USB
flash
The indicator in on, but
press play button the
cassette doesn’t running
Batteries no much power
exist.
Change new batteries or
use DC adapter to power
supply.
Wrong operation, if use USB
DC adapter to supply power,
but the AA/USB switch is on
“AA” side, will
cause this problem.
Switch to right place.
Press Playback button, no
music playing
1. If the indicator is slow flashing, means device is playing
the music, but you can’t hear anything, maybe because
the volume level is two low, please try to use “+” to
increase volume, if still no lucky, maybe because the
source volume is too low when recording, you need
record it again after increase volume.
2. If the indicator is keep on, means not playing. You need
press playback button again as sometimes you may
pressed, but the soft touch button hasn’t been touched.
To Next Page
Loading...