7
- FOR OTHER CARTRIDGE, USER CAN ADJUST THE TRACKING FORCE BY TURNING COUNTERWEIGHT
INWARDS OR BACKWARDS. TURN THE CUONTERWEIGHT INWARD TILL IT REACH THE HORIZONTAL
LINE. HOLD THE COUNTER WEIGHT WITH ONE HAND, TURN SCALE RING TO “0” AGAINST THE INDEX
LINE ON THE SHAFT WITH ANOTHER HAND, BE SURE NOT TO TURN TOGETHER WITH THE
COUNTERWEIGHT
- THE NUMBER ON THE SCALE RING CORRESPOND TO AROUND 0.4G OF TRACKING FORCE. TURNING
THE COUNTERWEIGHT INWARD CAN DECREASE THE FORCE, WHILE TURNING THE COUNTERWEIGHT
BACKWARD CAN INCREASE THE FORCE.
- TURNTABLE FOOT CAN BE TURNED CLOCK-WISE OR COUNTER CLOCK-WISE TO MAKE THE
TURNTABLE BALANCED.
LEVEL BALANCE ADJUSTMENT
- SET THE ANTI-SKATE KNOB TO “0”.
- HOLD THE HEADSHELL’S FINGER-LIFT WITH ONE HAND AND ACHIEVE
“LEVEL BALANCE” BY TURNING THE COUNTERWEIGHT EITHER CLOCKWISE OR COUNTER CLOCK WISE.
“LEVEL BALANCE” MEANS THE TONEARM IS PARALLEL TO THE RECORD ON THE PLATTER, AND THAT
THE TONEARM PIPE SHOULD NOT TILT TOWARDS THE COUNTERWEIGHT SIDE OF THE HEADSHELL
SIDE
TONEARM PROPERLY BALANCED:
COUNTERWEIGHT END IS TOO HEAVY, TURN THE COUNTERWEIGHT COUNTER-CLOCK WISE TO ADJUST:
HEADSHELL END IS TOO HEAVY, TURN THE COUNTERWEIGHT CLOCK-WISE TO ADJUST:
To Next Page
Loading...