CD In (Jam-Along™)
The CD input allows you to connect a Tape, CD, or MP3 player to the Genesis3,and jam with your favorite artists.The
signal from your player is output through the left and right, and headphone outputs of the Genesis3. To use the CD
INPUT feature, do the following:
1. Connect the headphone output of your player to the CD INPUT.
NOTE: Use a 1/8” stereo cable.
2. Press play on your Tape, CD, or MP3 player.
3. Adjust the volume.
4. Adjust the Genesis3’s OUTPUT LEVEL.
Introduction
8
To Next Page
Loading...
