Need help?Do you have a question about the DigiTech GNX2 and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| Technology | Digital |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Sampling Rate | 44.1 kHz |
| Display | LCD |
| Expression Pedal | Yes |
| Footswitches | 5 |
| Digital Output | S/PDIF |
| Outputs | 2 x 1/4" (L/Mono, R) |
| Effects | Chorus, Flanger, Phaser, Delay, Reverb |
| MIDI | In/Out |
| Power Supply | 9V DC adapter |
| Inputs | 1 x 1/4" (instrument), 1 x 1/4" (aux) |
Details on electrical safety, handling, and maintenance to prevent hazards.
Specific warnings and instructions regarding UK mains plug usage and electrical safety.
Details on DigiTech's warranty terms, limitations, and consumer rights.
Detailed explanation of the GNX2's front panel layout, buttons, knobs, and displays.
Descriptions of the Display, Data Wheel, Mode Buttons, and Footswitches.
Explanation of Mic, Input, Output, MIDI, and S/PDIF connections on the rear panel.
Overview of amp models, cabinet types, and the process of selecting them.
Explains creating custom Amp/Cabinet combinations using GeNetX™ technology.
Step-by-step guide to choosing amp and cabinet models for presets.
Fine-tuning amp gain, EQ, level, and cabinet resonance.
Steps to name and save the created HyperModel™™ to user locations.
Step-by-step guide to naming and storing edited presets to user locations.
Saving the preset to a user location after naming.
Detailed explanation of Wah-Pickup and Compressor effect parameters.
Details on Whammy, IPS, Detune, and Pitch Shift effects and their parameters.
Configuring delay time, feedback, and ducking for repeats.
Selecting reverb types, pre-delay, decay, damping, and level.
Choosing a base preset and combining amp/cabinet models for a new HyperModel™™.
Fine-tuning Gain, EQ, and Level for both amp channels.
Steps to name and save the created HyperModel™™ to user locations.
Disabling Wah and setting the Pickup Type to simulate humbuckers.
Fine-tuning the Equalizer for Acoustic and HyperModel™™ channels.
Turning off Talker™™ and setting Chorus effect parameters for thickness.
Turning off Delay and setting Hall Reverb parameters for ambience.
Naming and saving the completed preset to a user location.
Linking parameters, setting min/max values, and V-Switch for Expression Pedal.
To Next Page
