DigiTech GNX2 User Manual

MIDI Channel
The GNX2 MIDI channel is only used for receiving incoming MIDI data. The GNX2 does not send MIDI
program change commands or CC data.The procedure for selecting the MIDI channel is as follows:
1.Press the UTILITY button. The Utility button’s LED lights indicating you are in the Utility section.
2.Using the FX MODE or RHYTHM buttons, scroll to the left or right until
midichnl is displayed.
The numeric display show the currently selected MIDI channel.
3.Rotate the DATA WHEEL to select the MIDI channel. Your choices include 1 through 16, AL (all),
and of (off).
4.Press EXIT to return to the GNX2 presets.
Bulk Dump
The Sysex Bulk Dump uploads all the GNX2 presets and utility data to a sysex librarian,or MIDI record-
ing device.This is useful for making a backup copy of all your customized settings. The procedure for per-
forming a Bulk Dump is as follows:
1.Connect a MIDI cable from the GNX2 MIDI Out to the the MIDI In of a MIDI recording device.
2.Press the UTILITY button. The Utility button’s LED lights indicating you are in the Utility section.
3.Using the FX MODE or RHYTHM buttons, scroll to the left or right until
Bulkdump is displayed.
The Store button blinks indicating it must be pressed to begin the bulk dump.
4.Set the MIDI recording device to record.
5.Press STORE to begin the dump.The display reads
SeNDBuLK until the dump is complete at which
time the display reads
bulkdump.
6.Press EXIT to return to the GNX2 presets.
NOTE:The Bulk Dump sends information on the MIDI channel defined in the MIDI Channel menu.
MIDI Preset Dump
The Sysex Preset Dump uploads individual GNX2 presets to a sysex librarian,or MIDI recording device.
This is useful for making a backup copy of customized presets,or loading your presets into another
GNX2. The procedure for performing a Sysex Preset Dump is as follows:
1.Connect a MIDI cable from the GNX2 MIDI Out to the the MIDI In of a MIDI recording device or the
MIDI in of another GNX2.
2.Press the UTILITY button.The Utility button’s LED lights indicating you are in the Utility section.
3.Using the FX MODE or RHYTHM buttons, scroll to the left or right until
PrSTDuMP (Preset Dump)
is displayed.
4.Use the DATA WHEEL to select the preset number you want to dump.
5.Press STORE.The Display reads
SeND TO.
6.Use the DATA WHEEL to select the destination preset number.
7.Set the MIDI recording device to record.
8.Press STORE again.The display reads
send pst until the dump is complete at which time the display
briefly reads
DONE before it returns to PrSTDuMP.
9.Press EXIT to return to the GNX2 presets.
The Preset Dump sends information on the MIDI channel defined in the MIDI Channel menu.
NOTE:The Preset Dump sends information on the MIDI channel defined in the MIDI Channel menu.
42
Other Functions

DigiTech GNX2 Specifications

General

Brand	DigiTech
Model	GNX2
Category	Music Pedal
Language	English