Need help?Do you have a question about the DigiTech GSP5 and is the answer not in the manual?
General| Technology | Digital |
|---|---|
| Effects | Chorus, Delay, Distortion, Reverb |
| Control | Knobs |
| MIDI | In/Out/Thru |
| Weight | 2.7 kg |
| Type | Multi-Effects Processor |
Covers installation, power, cable connections, and initial adjustments.
Explains footswitch connection, input/output levels, and MIDI control setup.
Instructions for selecting and utilizing the unit's factory preset programs.
How the unit behaves on power-up and how to change programs.
Using front panel buttons (UP, DOWN, RIGHT, LEFT) for operation.
Adjusting signal levels and making audio connections.
Selecting footswitch modes and customizing display information.
Information on battery type, life, and replacement procedure.
Understanding program locations, effects chains, and MIDI control.
Detailed guide on adjusting parameters to customize sounds.
Steps for selecting program numbers and changing effects chains.
Methods for modifying parameter values and how they are stored.
Global factory reset, display mode activation, and capabilities.
Self-test mode initiation and software revision display.
Introduction to MIDI and how the GSP 5 uses it for control.
Understanding MIDI channels, program changes, and controller assignments.
Detailed technical specifications for inputs, outputs, THD, resolution, etc.
Description of the Mute and Memory Clear effects chain.
Details of Distortion, EQ, Chorus, Delay, and Voicing chain.
Definitions for reverb parameters like Early Reflection Level, Damping, etc.
Explains the System Exclusive Format, codes, and procedures.
Defines general message structure and specific data formats for GSP 5.
To Next Page
