Need help?Do you have a question about the DigiTech GNX3 and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| Amp Modeling | Yes |
| USB | No |
| Technology | Digital |
| Cabinet Modeling | Yes |
| Effects | Yes |
| Inputs | 1 x 1/4" (guitar), 1 x XLR (mic) |
| Outputs | 2 x 1/4" Line |
| MIDI | In/Out |
| Power Supply | 9V DC |
| Footswitch | Yes |
| Expression Pedal | Yes |
| Looper | Yes |
| Dimensions | 19.5" x 10.5" x 3.5" |
Covers electrical hazards, warnings, and symbols for safe operation.
Details compliance with safety and EMC directives.
Explains DigiTech's product warranty terms and conditions.
Details the functions of MODE, EXIT, DRUMS, STORE, UTILITY, AMP SAVE buttons.
Details all audio input and output jacks on the rear of the GNX3.
Describes S/PDIF, MIDI In/Out, and Memory Card slot functions.
Explains how to select modes and operate in Bank Mode.
Details how to use footswitches and parameters in Stompbox Mode.
Instructions for using the built-in guitar tuner.
Introduces amp and cabinet modeling for preset creation.
Steps to select Amp/Cabinet for Green and Red channels.
Details how to fine-tune gain, EQ, and level for amp channels.
Explains the process of combining amp/cabinet characteristics.
Procedure for saving custom amp/cabinet combinations as HyperModels.
Step-by-step guide to saving edited presets to user locations.
Explains Wah-Pickup effect and its adjustable parameters.
Explains bass, mid, and treble frequency and level adjustments.
Details gate type, threshold, and attack time settings.
Explains the goal of creating a custom amp/cabinet model.
Steps to select Amp/Cabinet for the Green Channel in a HyperModel.
Steps to select Amp/Cabinet for the Red Channel.
Guide to modifying gain, EQ, and level for the Green Channel amp.
Guide to modifying gain, EQ, and level for the Red Channel amp.
Procedure for adjusting the resonant frequency of cabinets.
Procedure for combining Green and Red Amp characteristics for a HyperModel.
Steps to save the created HyperModel to a user location.
Choosing amp models for preset channels to enable toggling.
How to fine-tune the EQ for the preset's amp channels.
Setting up the Noise Gate for quick opening with weak signals.
Adding a subtle Chorus effect and adjusting its parameters.
Adding Hall Reverb and adjusting its parameters.
Final steps to save the created preset to a user location.
Description of the recorder's controls and displays.
Details various input routing options for recording.
Explains GTR DRY and GTR AMP input configurations.
How to route recorded tracks back through presets for re-amping.
How to enable stereo recording for track pairs.
Configuring the click track for timing during recording.
Setting the tempo for click track and drum machine sync.
Setting the pre-recording count-off for timing.
Enabling continuous playback of a song.
Enabling automatic stop after longest recorded track.
Correcting loop timing to nearest eighth note.
Choosing between CD, Normal, and Economy recording quality.
Steps to save recorded audio to a computer-readable format.
Correcting loop timing to nearest eighth note.
Assigning and controlling parameters with the expression pedal.
Introduction to global functions accessible via the Utility menu.
Restoring the GNX3 to its original factory settings.
Procedure to reformat internal or external recorder memory.
Instructions for installing and using the GENEDIT software.
To Next Page
