Need help?Do you have a question about the DigiTech Polara and is the answer not in the manual?
General| Effect Type | Reverb |
|---|---|
| Bypass | True Bypass |
| Input | 1/4" Mono |
| Output | 1/4" Mono |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Reverb Types | Hall, Plate, Reverse, Modulated, Spring |
| Power Supply | 9V DC |
| Inputs | 1 |
| Outputs | 1 |
Details DigiTech's product warranty, including registration, limitations, and consumer responsibilities.
Guidance on contacting DigiTech for technical assistance, returning products, and required authorization.
How to enable the effect, adjust LEVEL, REVERB TYPE, LIVELINESS, DECAY, and TAILS controls.
Details main controls: Tails Switch, Reverb Type, Level, Liveliness, and Decay knobs.
Explains DC Power Jack, Input 1 (Mono), Input 2, Output 1 (Mono), and Output 2 connections.
Describes Indicator LED status and the Foot Switch for turning the effect on/off.
Illustrates connecting the Polara pedal to mono or stereo amplifier setups.
Illustrates connecting the Polara pedal within an amplifier's effects loop.
Provides suggested settings for 'Surf Spring', 'Ambient Shimmer', 'Bright Plate', and 'Big Jazz Hall'.
Instructions for placing and removing the included StompLock to secure pedal settings.
Lists interface controls, jacks, input/output impedance, physical dimensions, weight, and power requirements.
To Next Page
