3
4. Decay Knob
Controls the length of time it takes for the reverb to fade out.
5. Input 1 (Mono)
Connect your instrument, the output of a pedal, or an amp effects send to this jack. Signals are
heard at both outputs when only the Input 1 (Mono) jack is used.
6. Indicator LED
Lights when the effect is turned on.
7. Input 2
Connect a second input to this jack for stereo operation. Inputs 1 and 2 are processed separately
through the Stereo Reverb effect then fed to Outputs 1 and 2 keeping true stereo separation
between channels.
8. Foot Switch
Turns the effect on and off.
9. Output 2
Connect this output to the input of a second guitar amplifier when a second amp is being used.
10. Output 1 (Mono)
Connect this output to the input of a single guitar amplifier or amp effects return.
11. Liveliness Knob
Controls the amount of high frequency response in the Reverb’s effect signal.
12. Level Knob
Controls the reverb level.
To Next Page
Loading...
Need help?
General
