DigiTech GNX3 User Manual

1. Begin with the recorder stopped.
2. Press the SETUP button until the GNX3’s main display reads
sterorec Of.
3. Use the DATA WHEEL to turn the Stereo Enable feature on and off.
4.When finished, press EXIT.
This feature doesn’t affect track arming when using the recorder panel. You can arm two tracks using the
track buttons. When two tracks are armed for recording using the panel, they are automatically panned
hard left and right.
Click Track
The Click Track keeps time when the recorder is recording. When Click Track is enabled, a metronome is
set to the selected songs tempo while recording. To setup the Click Track, follow these steps:
1. Begin with the recorder stopped.
2. Press the SETUP button until the GNX3’s main display reads clicktrk Of.
3. Use the DATA WHEEL to turn Click Track on and off.
4.When finished, press EXIT.
Te m p o
Te mpo designates how fast the Click Track plays during recording. It also sets the tempo for the GNX3’s
drum machine that can be recorded or syncronized to for each song. To setup the Tempo, follow these
steps:
10000
clicktrk
OF
10000
sterorec
OF
41
Recorder

DigiTech GNX3 Specifications

General

Brand	DigiTech
Model	GNX3
Category	Music Pedal
Language	English