To use the Drum Machine, do the following:
1. Press the Drums button.The Drums button’s LED lights and the current drum pattern begins playing.
If the Drums button is pushed, the Store, Utility, and Amp Save LEDs light.
2. Press the Store, Utility, or Amp Save buttons to adjust the Pattern,Tempo, or Level using the DATA
WHEEL.
Select a Pattern
1. Press the STORE (Pattern) button to adjust the drum pattern. The selected drum pattern is
shown in the display.
2. Rotate the DATA WHEEL to select a new pattern. There are 30 different patterns and a
metronome available including:
Te m p o
To adjust the Tempo, do the following:
1. Press the UTILITY (Tempo) button. The display shows the current tempo in beats per minute
(BPM).
2. Rotate the DATA WHEEL to select a new tempo. Tempo ranges are from 40 beats per minute
(40BPM) to 240 beats per minute (240BPM).
Level
To adjust the Level, do the following:
1. Press the AMP SAVE (Level) button. The display reads DruM LVL (drum level).
2. Rotate the DATA WHEEL to select the playback volume of the drum loop. Level ranges are from
1 to 99.
3. Press the DRUMS button again to turn the Drum Machine off.
ROCK 1
ROCK 2
ROCK 3
ROCK 4
HrdROCK1
HrdROCK2
HrdROCK3
POP 1
POP 2
POP 3
FUNK 1
FUNK 2
FUNK 3
BLUES
JAZZ
DANCE 1
DANCE 2
DANCE 3
DANCE 4
URBAN 1
URBAN 2
CouNTRY1
CouNTRY2
CouNTRY3
SWING 1
SWING 2
REGGAE
CHACHA
BOSSA 1
BOSSA 2
METROnom
13
Introduction
To Next Page
Loading...
Need help?
General
