DigiTech GNX2 User Manual

TRIGGERED FLANGER (TRiGFLnG)
A Triggered Flanger is the same sound as a regular Flanger but it lets you choose the starting point of
the Flanger sweep. With a regular Flanger,the low frequency oscillator (LFO) is continually sweeping
up and down. Meaning, when you begin to play,the flanger may be at the top,bottom, or any random
point of the sweep. With a Triggered Flanger,every time the signal exceeds the Sensitivity level set-
ting,the Flanger begins at the point of the sweep that you set with the value of the LFO Start
Parameter.
Parameter 1 - The Number 2 knob adjusts the rate (Speed) of the modulation. Ranges from 1 to
99.
Parameter 2 - The Number 3 knob adjusts the strength the signal must be (senstvty) in order to
trigger the Flanger.Ranges from 1 (requiring strong signals to trigger) to 99 (triggers
with weak signals).
Parameter 3 - The Number 4 knob selects the Flanger sweep starting point (LFO STrt). Ranges
from 0 to 99.
Mod Mix - The Number 5 knob controls the mix (mod mix) of wet and dry signal.Ranges from 0
(all dry) to 99 (all wet).
TRIGGERED PHASER (TRiGPHAs)
A Triggered Phaser is the same sound as a regular Phaser but it lets you choose the starting point of
the Phaser sweep. In a regular Phaser, the low frequency oscillator (LFO) is continually changing the
phase of the signal. Meaning, when you begin to play,the phaser may be at any random point of the
phase. With a Triggered Phaser, every time the signal exceeds the Sensitivity level setting,the Phaser
begins at the point of phasing that you set with the value of the LFO Start Parameter.
Parameter 1 - The Number 2 knob adjusts the rate (Speed) of the modulating phase.Ranges from
1 to 99.
Parameter 2 - The Number 3 knob adjusts the strength the signal must be (senstvty) in order to
trigger the Phaser.Ranges from 1 (requiring strong signals to trigger) to 99 (triggers
with weak signals).
Parameter 3 - The Number 4 knob selects the Phaser sweep starting point (LFO STrt).Ranges
from 0 to 99.
Mod Mix - The Number 5 knob controls the mix (mod mix) of wet and dry signal.Ranges from 0
(all dry) to 99 (all wet).
TREMOLO
(TREMoLO)
A Tremolo effect modulates the volume of the signal at an even rate.
Parameter 1 - The Number 2 knob adjusts the rate (Speed) at which the volume modulates.
Ranges from 1 to 99.
Parameter 2 - The Number 3 knob adjusts the intensity (Depth) of the modulating volume.Ranges
from 0 to 99.
Parameter 3 - The Number 4 knob selects the type of wave form the modulation will use. Choices
include:Triangle , Sine, and Square.
The Number 5 knob does not function when the Tremolo is selected.
* These Parameters are only available using the GenEdit™ computer editor software.
24
Effects and Parameters

DigiTech GNX2 Specifications

General

Brand	DigiTech
Model	GNX2
Category	Music Pedal
Language	English